If you have a tap that drips or takes excessive tightening to shut off completely, and a new washer hasn't solved the problem, or didn't solve it for long, then it is likely that the valve seat is pitted. With...
First of all you need to make sure what type of tap you require Mono block A mono block tap will fit a 1 tap hole basin only, these usually come with a pop up waste kit Inc with the tap unless otherwise...
PLUMBING SYSTEMS The hot and cold supplies must be balanced. the cold feed should come from the cold-water tank and not in the mains. CLEANING /GENERAL CARE Chrome and gold plated finishes should be...
Standard tap valves can start to leak should the rubber washer become worn. This can be easily sorted out by replacing the washer.If the taps are ceramic disc, then the entire valve will need replacing.One of...
What is the Minimum Water Pressure I need? This depends on the tap range you choose, but is typically a minimum of 0.1 bar (1 metre head) for a screw-down (rubber washer) tap valve and 0.3 bar (3 metre head)...