A GUIDE TO BATHROOM FITTINGS FROM THE BATHROOM FITTINGS STORE To visit my shop click here Slotted waste or un-slotted waste? Angled radiator valve or straight?What are standard bath and basin taps...
If you have a tap that drips or takes excessive tightening to shut off completely, and a new washer hasn't solved the problem, or didn't solve it for long, then it is likely that the valve seat is pitted. With...
What is a Whirlpool Bath How they work Whirlpool baths are operated by air and water. The suction of the whirlpool takes the water from the bath and into the pump. The motor then uses air to pump the water...
First of all you need to make sure what type of tap you require Mono block A mono block tap will fit a 1 tap hole basin only, these usually come with a pop up waste kit Inc with the tap unless otherwise...
PLUMBING SYSTEMS The hot and cold supplies must be balanced. the cold feed should come from the cold-water tank and not in the mains. CLEANING /GENERAL CARE Chrome and gold plated finishes should be...
Standard tap valves can start to leak should the rubber washer become worn. This can be easily sorted out by replacing the washer.If the taps are ceramic disc, then the entire valve will need replacing.One of...
What is the Minimum Water Pressure I need? This depends on the tap range you choose, but is typically a minimum of 0.1 bar (1 metre head) for a screw-down (rubber washer) tap valve and 0.3 bar (3 metre head)...